running
euca-allocate-address command gives a public IP address.
After this if I again run euca-describe-address (as admin).
its displaying the address alloted in the previous step as available.
How to deallocate address in eucalyptus?
can any one help me

Thanks,
Sri.

when i write this command:
euca-describe-availability-zones verbose
I got this error:
Traceback (most recent call last):
File “/usr/local/bin/euca-describe-availability-zones”, line 36, in ?
from euca2ools import Euca2ool, Util
File “/usr/lib/python2.4/site-packages/euca2ools/__init__.py”, line 1036
finally:
^
SyntaxError: invalid syntax
but i have installed euac2ools properly and have correct output of last command but this is new to me. can someone help to correct this error?

What do you mean by “have correct output of last command”? Does this mean the other euca-* commands run fine?

Thanks,
Rosh

Also I am not able to get the Web GUI in my System.
I was not able to see the WEBUI.
When I enter the URL as,
https://localhost:8443,
I got,
HTTP ERROR: 503
Problem accessing /. Reason:
SERVICE_UNAVAILABLE
Can any one help…

Seems like your CLC did not start up correctly. And make sure you have started CLC, CC and NC as root user

Questions:

Are you running Eucalyptus on more than one node? i.e. is you node controller running on different machines than your cluster controller (CC) / cloud contoller (CLC)?
Did you register
Could you check to make sure CLC is started and running? You could do a quick check by running “ps auxww | grep eucalyptus-cloud” command on the the machine you installed the CLC. Pls post the output
Could you please run “netstat -tan | grep LISTEN”? Pls post the output. You should have ports 8443, 8773, 8774, 9001 listening

Ignore the “java.lang.IllegalStateException” error for now.

As for the “com.eucalyptus.config.NoSuchComponentException: StorageControllerConfiguration” eror, I cannot say for sure what is wrong by just looking at the one line log message.
Could you check the cloud-output.log and search for the “StorageContollerConfiguration” line. It should appear during startup.
For example. in my cloud-output log, I see the following:
<snippet>
…
…
| Entities for config
| ——————————————————————————–
13:59:33 INFO LogUtil | ?:? class edu.ucsb.eucalyptus.cloud.entities.Counters
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.entities.AbstractPersistent
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.entities.UserMetadata
13:59:33 INFO LogUtil | ?:? class edu.ucsb.eucalyptus.cloud.entities.LVMMetaInfo
13:59:33 INFO LogUtil | ?:? class edu.ucsb.eucalyptus.cloud.entities.LVMVolumeInfo
13:59:33 INFO LogUtil | ?:? class edu.ucsb.eucalyptus.cloud.state.AbstractIsomorph
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.config.ClusterConfiguration
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.config.ComponentConfiguration
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.config.StorageControllerConfiguration
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.config.System
13:59:33 INFO LogUtil | ?:? class com.eucalyptus.config.WalrusConfiguration
…
…
</snippet>

Perhaps you could stop eucalyptus-cc, eucalyptus-cloud, eucalyptus-nc and then start these in the following order:

/etc/init.d/eucalyptus-cc cleanstart
/etc/inid.d/eucalyptus-cloud start
/etc/init.d/eucalyptus-nc start

Tail out the logs cloud-output.log, cloud-error.log, nc.log to keep an eye out for error messages during stop and start.

You could also follow the binary install instructions laid out at: http://blogs.plexibus.com/2010/05/19/eucalyptus-setting-up-a-private-infrastructure-cloud

HTTP ERROR: 503

Problem accessing /. Reason:

SERVICE_UNAVAILABLE

Can any one help….

Is it required or mandatory to use Open JDK?
I have installed Eucalyptus with Sun Java and
“java -version” shows,

java version “1.6.0_20″
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Server VM (build 16.3-b01, mixed mode)

and uname -a shows,
Linux cloudcdac 2.6.26-2-xen-686 #1 SMP Sat Dec 26 11:29:49 UTC 2009 i686 GNU/Linux

I am using BOSS Linux(A Debian derived linux) and
the distro is lenny.

Also from ,
netstat -an | grep 8443

tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN

netstat -an | grep 9001,

tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN

i found both ports are opened and in LISTEN state.

I was installing eucalyptus from source(version – eucalyptus-1.6.2-sr c) by referring the link,
http://open.eucalyptus.com/wiki/installing-eucalyptus-source-16
I was able to continue the installation .
Then i Configured for that in SYSTEM_MODE(networking).

In the file /opt/eucalyptus/etc/eucalyptus/eucalyptus.conf,
I made the following changes ,
VNET_PUBINTERFACE=”eth0″
VNET_PRIVINTERFACE=”eth0″
VNET_MODE=”SYSTEM”
VNET_BRIDGE=”eth0″

Later I started eucalyptus by using,

# enable services on the front-end
$EUCALYPTUS/usr/sbin/euca_conf –enable cloud –enable walrus –enable sc

# start enabled front-end services
$EUCALYPTUS/etc/init.d/eucalyptus-cloud start

# start the cluster controller

$EUCALYPTUS/etc/init.d/eucalyptus-cc start

$EUCALYPTUS/etc/init.d/eucalyptus-nc start

Then I follwed the following link.
http://open.eucalyptus.com/wiki/first-time-setup-16

When I put,
$EUCALYPTUS/usr/sbin/euca_conf –register-walrus 192.168.31.40
(My LAN IP),
I am getting ,
ERROR: you need to be on the CLC host and the CLC needs to be running.
When I checked cloud-error.log, I was able to see,

“14:53:24 [StorageProperties:main] ERROR com.eucalyptus.config.NoSuchComponentException: StorageControllerConfiguration named StorageController3698e36f-3232-4a57-9697-dd07d41ee30e
17:37:33 [ShutdownHook:Shutdown Hook] ERROR Problem calling “get cause” on IllegalStateException.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.logicalcobwebs.proxool.ShutdownHook.remove(ShutdownHook.java:40)
at org.logicalcobwebs.proxool.ProxoolFacade.shutdown(ProxoolFacade.java:238)
at org.logicalcobwebs.proxool.ProxoolFacade.shutdown(ProxoolFacade.java:220)
at org.logicalcobwebs.proxool.ShutdownHook.run(ShutdownHook.java:99)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IllegalStateException: Shutdown in progress
at java.lang.ApplicationShutdownHooks.remove(ApplicationShutdownHooks.java:55)
at java.lang.Runtime.removeShutdownHook(Runtime.java:220)
… 9 more”

actaully What went wrong here…
Can any one help me to resolve this issue???

Thanks,
Sri